How to Resetter Canon MP198 error E27

I was often get questions about how to reset Canon MP198, and this time I want to share about How to Reset Canon MP198 with error E27.



How to Resetter Canon MP198 error E27 : prepare in service mode :

• The printer is off and plugged the power cord.
• Press and hold STOP / RESET then press and hold POWER.
• Release the button STOP / RESET (POWER button should not be released)
• Press STOP / RESET 2 (two) times, then release the POWER button
• Let green LED blink until the printer head stops moving. And the LCD panel shows number 0 (zero).
• The computer will detect new hardware, just ignore it.
• This situation meaning that Canon MP198 printer is in the SERVICE MODE and ready for reset.
• Next  Step run MP198 Resetter, if  you don't have it, please download Resetter MP198 at this link http://www.ziddu.com/download/12372220/ServiceTool_V1074MP198.zip.html

How to Resetter Canon MP198 error E27 :

• Exctract File Resetter MP198.
• Prepare a second paper in the printer (to print at the time of the reset process)
• Run the program Resetter MP198.
• Click "MAIN", the printer will proceed, then MP198 will print one page with the words "D = 000.0 ....."
• Click the "EEPROM Clear".
• Then click the "EEPROM", and the printer will print the results of Resetter MP198. One of the writing row as follows : "TPage (COPY TTL = 00 000 = 00 000)"
• Turn off the printer by pressing the POWER button.
• Done ...

Good luck.

Selengkapnya - How to Resetter Canon MP198 error E27

How to Reset Canon IP2770 Error 5B00

This time I will share about  How to Reset Canon IP2770 Error 5B00. I was try this resetter and runs perfectly. 100% working. This resetter no passwords ... and FREE

How to Reset Canon IP2770 Error 5B00

Download Canon iP2770 Resetter v1074 no password below:

http://www.ziddu.com/download/11980752/ServiceTool_V1074_iP2770.rar.html


Do not forget to turn off the download manager, so the iP2770 Resetter successfully downloaded.

Go to the iP2770 Service Mode :

• The printer is off and plugged the power cord.
• Press the RESUME button two seconds
• then press the POWER button until the green light flame (while pressing the POWER button, ... don't release RESUME button)
• Then release the Resume button, but do not release the POWER button.
• POWER button while still pressed, press the Resume button 5 times. Led will flash alternately orange glow green with the last orange. (not to mistaken 4x because the printer will be totally dead, but it is temporary as well) Then ...
• Release both buttons simultaneously.
• Led will blink briefly and then will glow GREEN.
• The computer will detect new devices, please ignore .....
• This situation is called SERVICE MODE iP2770 and iP2770 ready to be reset.

Then run Canon iP2770 Resetter v1074 :

• Exctract File iP2770 Resetter.
• Prepare a two paper in the printer (to print at the time of the reset process).
• Run the program iP2770 Resetter
• Click "MAIN", then the printer will proceed and iP2770 will print one page with the words "D = 000.0"
• Click the "EEPROM Clear".
• Then click the "EEPROM", and the printer will print the results off iP2770 Resetter. One of the writing row as follows:
• "TPage (TTL = 00 000)"
• Turn off the printer by pressing the POWER button.
• Done ...

Good luck

Selengkapnya - How to Reset Canon IP2770 Error 5B00

Resetter Epson L200 and How Uses

This time, I will discuss about Resetter Epson L200 and How to Use it. Epson L200 is a new printer from Epson which using a CISS from the Epson original. Epson L200 and it did not escape from the counter of the protection system provided by the Epson. So when the printer is Epson L200 already full at the counter then we have to reset it to initial conditions. That is by using Epson Resetter L200.

Resetter Epson L200 and How Uses:

Resetter epson L200 can be downloaded at the following link Ziddu:
http://www.ziddu.com/download/14080410/ResetterL200.7z.html

Password: ekohasan

Using 7zip compression format, if not have the software can be downloaded at:
http://www.ziddu.com/download/14083147/7z920.exe.html
or
http://downloads.sourceforge.net/sevenzip/7z920.exe

Resetter Epson L200 and How Uses:

1. Resetter Epson L200 and How Uses:
2. Turn Espon L200 and L200 make sure Espon already connect to the computer and installed drivers.
3. Then run Resetter Epson L200, by double clicking the file "AdjProg.exe"
4. Click "accept">> "Particular Adjustment Mode">> Select "Waste ink pad counter reset">> click "Check">> uncheck "play pad counters, FL Boxes counter, tube Ink Counter", then click the "initialization"> > "Finish".
5. The next step Epson L200 turn off, then disconnect the power.
6. The last step reattach the power cord and turn on the printer, wait a while until Epson Epson L200 and L200 will return to normal.

OK, that is How to use Epson resetter L200.

Good luck

Selengkapnya - Resetter Epson L200 and How Uses

How to Reset Epson Stylus T13

This time I will discuss about how to reset epson T13. Resetter
Epson T13 was obtained from my firend. And from the experience, this T13 Epson resetter
functioning properly. 100% working.

How to Reset Epson Stylus T13 :

• The first step of course, the driver epson printer T13 must have been installed on your computer.
• Download software resetter Epson T13 first. Software named Resetter Epson T13, you can download it here http://www.ziddu.com/download/12673537/T13byOrTHoTaMiNe.rar.html
• Date computers do not need to be changed as previously resetter.
• IMPORTANT! Turn off your Antivirus, because resetter T13 detected as virus by antivirus software.
• Run the program resetter Epson T13 with a double click on "AdjProg.exe".
• Then follow the following picture:

"Check: used to counter check the maximum 7800 points, you can see it in the main pad counter. If more or close to 7800 points means the printer needs to be reset "
"Initialization: used to reset or re zerro counter printer "

• When finished turn the printer off then on again. The printer will flame with a full green light. Means the printer Epson Stylus T13 that have been error is ready for use again.

Good luck.

Selengkapnya - How to Reset Epson Stylus T13

How to Service LCD Monitor

We live in a world of electronic gizmos, and like all things built by man, they will eventually fail, sometimes sooner that we would like. There comes that time, the moment that you realize that a device you have depended on for years has failed.

In this case it was my wife who pointed out the trouble. Her computer monitor was beginning to display a rippling pattern across the display. At first it wasn't too bad, but gradually got worse, to the point that using the display was very annoying. When she begins to make noises about a trip to

Selengkapnya - How to Service LCD Monitor