How to Reset Canon IP2770 with Error 5200

This time, I will try sharing on How to Reset Canon IP2770 Error 5200. IP 2770 is a new printer, and I also at the first time get error 5200 on canon iP2770. Want to know how ...?

Early Indication:
When the iP2770 is turned on, the printer looks normal with GREEN LED on. But when ordered to print, then the 5200 on iP2770 error will appear, and the LED will blinking 8x green 1x orange.

How To Reset Canon IP2770 Error 5200 :

1. The printer is off and plugged the power cord.
2. Press the RESUME button two seconds,
3. then press the POWER button until the green light flame ( while pressing the POWER button, don't released RESUME button )
4. Then release the Resume button, but do not release the POWER button.
5. POWER button while still pressed, press the Resume button 5 times. Led will flash alternately orange glow green with the last orange. (not to mistaken 4x because the printer will be totally dead, but it is temporary as well) Then ...
6. Release both buttons simultaneously.
7. Led will blink briefly and then will glow GREEN.
8. And the computer will detect new hardware, just ignore ...
9. Press the POWER button, then the printer will off.
10. Press the POWER button again then the printer will on and ... PRINTER iP2770 is ready to use.

Other way on How To Reset Canon iP2770 error 5200 :

1. Turn the printer, and printer will look normal.
2. Run the printer for printing a document or a print test, then the 5200 error will appear.
3. Directly unplug the power cord without pressing on/off button
4. Open it and slide it into the middle of its cartridges manually
5. Unplug all cartridges and leave the lid open
6. Turn on the printer, head carriage will move left and right because the lid is still open and will stop in the middle.
7. Replace the cartridge, and close the right
8. The printer will return to normal.

Selengkapnya - How to Reset Canon IP2770 with Error 5200

How to resetter epson TX110 and 111

Here, I will share about How to resetter epson TX110 and 111.

How to Resetter Epson TX110 - TX111

"Caution: This adjustment program similar to a virus that is detected as virus by antivirus. Turn off your antivirus program first so it can be operated"

• Download software resetter Epson TX110 - TX111 first. Software named Resetter Epson Stylus TX110 - TX111, you can download here http://www.ziddu.com/download/8268984/TX110-TX111Epsonresetter.zip.html.
• Date of the computer do not need to be changed as previously resetter.
• Run the program resetter Epson TX110 - TX111 with a double click "AdjProg.exe", directly in "AdjProg.exe" because it "does not use the loader."
• Then follow the following picture :

"Check: used to counter check the maximum 7800 points, you can see it in the main pad counter. If more or close to 7800 points means the printer needs to be reset"

"Initialization: used to reset or re-counter zerro the printer"

• When finished, turn the printer off then on again. The printer will on with a full green light. Means that Epson Stylus TX110 - TX111 ready for use again.

Good luck.

Selengkapnya - How to resetter epson TX110 and 111

How to Reset Epson Stylus T11

Finally, the long-awaited come. After a long search for software resetter Epson T11. It was a relief ..... Before I had time to post how to manually reset epson T11. And this time I will discuss how to reset epson T11 and 100% Tested and FREE.

How to Reset Epson Stylus T11 :

• The first step, you must have already installed the printer driver at your computer.
• Download software resetter Epson T11 first. You can download here http://www.ziddu.com/download/7560800/ReseterT11Working-16-Nov-2009.rar.html
• Run the program resetter Epson T11 with a double click on "Loader.exe", do not jump in "AdjProg.exe" because the program will not run if straight from the "AdjProg.exe"
• Then follow the following picture:

"Check: used to counter check the maximum 7800 points, you can see it in the main pad counter. If more or close to 7800 points means the printer needs to be reset"

"Initialization: used to reset or re-counter zerro printer"

When finished, turn off epson T11, then turn on again. The printer will on with a full green light. Epson Stylus T11 printer ready for use again.

Selengkapnya - How to Reset Epson Stylus T11

How to Fix Error B200 on Canon iP2770 and MP258

This time I will share experiences about How to Fix Canon iP2770 and MP258 with Error B200. This question is often asked and I will answer now. This answer is from my friend who want to share about his experience.

How to Fix Error B200 on Canon iP2770 and MP258 :

Here is step by step to fix Error B200 on Canon iP2770 and MP258, but No Result ( Unclear) :

• Reset Printer with software resetter = unclear.
• Press Resume button 15 - 25 minutes, print result is not good.
• Replace the catrid with the new one = result is unclear.

Finally this is the way How to Fix Error B200 on Canon iP2770 and MP258 :

Replace power supply / adaptor on your iP2770 or MP258. And the error B200 on iP2770 and MP258 will soon be resolved.

This picture is just an illustration.

Good luck.

Selengkapnya - How to Fix Error B200 on Canon iP2770 and MP258

Resetter Epson L100 and How to Use it

I'am very grateful for the visitors of this blog is increasing every day. I will keep writing, hopefully, can provide benefits to all visitors. Here is I will try to post about Resetter Epson L100 and How to Use it. Obviously a lot of visitors who are looking for this resetter epson L100.

Resetter Epson L100 and How to Use it :
Resetter epson L100 can be downloaded at the following link Ziddu:
http://www.ziddu.com/download/14080411/resetterL100.7z.html
Password: ekohasan

Using 7zip compression format, if you don't have the software, you can download it at:
http://www.ziddu.com/download/14083147/7z920.exe.html
or
http://downloads.sourceforge.net/sevenzip/7z920.exe

For tips on downloading via ziddu order to more quickly and successfully, see the following links:
http://ekohasan.blogspot.com/2010/04/cara-download-file-di-ziddu-secara.html

Resetter Epson L100 and How Uses:

• Turn on Epson L100 and make sure that Espon L100 already connect to the computer with driver installed.
• Then run Resetter Epson L100, by double clicking the file "AdjProg cracked.exe"
• Click "accept">> "Particular Adjustment Mode">> Select "Waste ink pad counter reset">> click "Check">> uncheck "play pad counters, FL Boxes counter, tube Ink Counter", then click the "initialization"> > "Finish".

• The next step,turn off Epson L100 , then disconnect the power.
• The last step, reattach the power cord and turn on the printer, wait a while until Epson L100 ready.

Epson L100 is ready for use again.

Selengkapnya - Resetter Epson L100 and How to Use it